Monday, March 2, 2009
LS1 Engine
Hydraulic Master Cylinder Installation
I started by filling the hole underneath the brake master cylinder.
I also had to cut an area open for the clutch master cylinder.
I also had to cut an area open for the clutch master cylinder.
There was a little flex in the bracket and it looked a bit sloppy so I filled between the firewall and the brcket with metal to make it look more like it was stamped into the firewall.
behind the firewall for added strength.
I also closed up the hole around the steering column some. I made a plate that bolts to the firewall and welded it to the steering column. The location of the reservoir is only temporary.
Clutch petal was gusseted and hole drilled.
I had to drill another hole because first wasn't quite right.
I had to drill another hole because first wasn't quite right.
Fuel Tank Modifications
I made a sheet metal box out of 18 gage steel. It was made out of a flat sheet, then folded and MIG welded together.
Subscribe to:
Posts (Atom)